StarTech.com 410VDSLEXT2 Instruction Manual download pdf (Page 10)

Instruction Manual

Pin 4 - General Protection

OFF: If Pin 4 is in the OFF position, the Transmitter Unit will operate with a SNR ratio up

to 9 dB.

ON: If Pin 4 is in the ON position, the Transmitter Unit will operate with a SNR ratio of

6 dB.

OFF: If Pin 2 is in the OFF position, the Transmitter Unit will operate in Interleave mode,

with communication protection for up to 250ms of impulse noise with latency less

than 6 ms

ON: If Pin 2 is in the ON position, the Transmitter Unit will operate in Fast mode, with

direct data transmissions having less than 1ms of latency.

Pin 3 - Band Plan

OFF: If Pin 3 is in the OFF position, the Transmitter Unit will operate in Symmetric

mode, with both downstream and upstream transmissions operating on the G.997

band plan.

ON: If Pin 3 is in the ON position, the Transmitter Unit will operate in Asymmetric mode,

with asymmetric short range transmissions operating at the highest available line rate.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

StarTech.com 410VDSLEXT2 Instruction Manual Page 10