StarTech.com SV831GB Datasheet download pdf (Page 19)

g Manual Scan enables you to manually switch back and forth

between power-on computers.

left Ctrl + left Ctrl + F2

Press áor âto select the previous or the next computer in sequence.

And, press any other key to abort the Manual Scan.

Note: For OSD models, Scan Type determines whether eye mark is

necessary during Manual Scan.

g To adjust Scan Rate which sets the duration before switching to

the next computer in Auto Scan:

left Ctrl + left Ctrl + F3

The StarView sends one to four beeps indicating scan interval of 3, 8,

15 and 30 seconds respectively.

g To adjust keyboard typematic rate (characters/sec), this setting

over-rides that of BIOS and any operating system:

left Ctrl + left Ctrl + F4

The StarView generates 1 to 4 beeps corresponding to 10, 15, 20

and 30 characters/sec respectively.

g Audio Stick

An optional multimedia module can be LINKed to the back of each

StarView for selecting microphone and stereo speaker signals.

There are two options for Audio Stick: ON and Off. When set to 'On',

audio selection follows computer selection. When set to 'Off', audio

selection stops following computer selection. It is useful if you want

to listen to a particular computer's audio signal while operating

other computers.

left Ctrl + left Ctrl + F5

The StarView generates 1 or 2 beeps corresponding to On and

Off respectively.

Cascade Configuration

Connection

Before connecting a device (a computer or a Slave) to the Master

under power, you must turn off the device. The Master must have

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

No comments

StarTech.com SV831GB Datasheet Page 19