StarTech.com NETRS2321P Instruction Manual download pdf (Page 6)

Instruction Manual

DIN Rail Mounting

Attach the included DIN Rail brackets (one per side) using the provided screws to the

top DIN Rail screw hole (marked in the above diagram), and clip to your DIN Rail

Load Default Settings / System Reset Button

Load Default Settings

Press and hold this button for more than 3 seconds, then release to load the factory

default settings.

IP address: 10.1.1.1

Subnet Mask: 255.0.0.0

System Reset

Press and hold this button for more than 10 seconds, then release to reboot the device

(maintains conguration settings)

LED Indicators

LED Name Status Description

Ready

On Power is on and the device is ready.

O Power is o or the device is not ready.

Link/Act

On UTP is link.

Blinking UTP Tx/Rx is activity.

O UTP is not link.

Tx/Rx

Blinking

RS-232 port is transmitting or receiving

data.

O

No data is transmitting or receiving in

RS-232 port.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

StarTech.com NETRS2321P Instruction Manual Page 6