StarTech.com NETRS2321P Instruction Manual download pdf (Page 14)

Instruction Manual

Reverse Telnet

Reverse Telnet works the same as Telnet Server mode. The Telnet port is listens for

a connection after booting up. If you encounter errors when using some Telnet

clients, such as the Microsoft interpretation of Telnet for Windows XP you can try the

connection using Reverse Telnet mode.

CLI Mode

The Command Line Interface (CLI) allows user to congure and control NETRS2321P

directly through the UART interface.

NOTE: CLI mode is only available when NETRS2321P is in TCP Server Mode.

Port Number

This assigns the TCP server port number that the server will listen on for connecting

clients. (Only for TCP Server Mode)

Remote Server IP Address

When in Client mode, this device will automatically try to connect to the remote TCP

server with this IP address.

Client mode inactive timeout

When in Client mode, this parameter sets the time that device will maintain a

connection until timeout, if there is no data transfer over the connection. After

disconnecting, the device will try to build a new connection again immediately.

Server mode protect timeout

When in Server mode, this parameter sets the time that device will maintain a

connection until timeout, if there is no data transfer over the connection. Once

disconnected, only a Client can initiate a new connection to the Server.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

StarTech.com NETRS2321P Instruction Manual Page 14