StarTech.com SV411K Instruction Manual download pdf (Page 6)

Instruction Manual

Using Your KVM Switch

The LEDs on the switch indicate which PC is active. You can scroll between PCs

by either pressing the push-button on the top of the switch or by using a hotkey

command. A hotkey command is a short sequence of keystrokes beginning with two

left Ctrl keystrokes followed by another keystroke. Use only the left Ctrl key and do not

use the keypad at the right of the keyboard.

Selecting a Computer

Command Hotkey Sequence

Select Computer 1 Left Ctrl + Left Ctrl + 1

Select Computer 2 Left Ctrl + Left Ctrl + 2

Select Computer 3 Left Ctrl + Left Ctrl + 3 (SV411, SV411K only)

Select Computer 4 Left Ctrl + Left Ctrl + 4 (Sv411, SV411K only)

Scroll between powered-

on computers

Left Ctrl + Left Ctrl + F2 + Up/Down Arrow

Auto-Scan Mode

Command Hotkey Sequence

Start auto-scan Left Ctrl + Left Ctrl + F1

End auto-scan Left Ctrl + Left Ctrl

Select auto-scan interval Left Ctrl + Left Ctrl + F3

Auto-scan mode will be suspended if the switch detects any keyboard or mouse

activity. When the activity ceases, auto-scan mode will resume. The auto-scan interval

can be set to 3 seconds (default setting, represented by one beep), 8 second (two

beeps), 15 seconds (three beeps), and 30 seconds (four beeps).

1 2 3 4 5 6 7 8 9 10

No comments

StarTech.com SV411K Instruction Manual Page 6