Manual Revision: 09/30/2011For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&
Instruction Manual7Turn the Audio ON/OFFStep 1Press the desired port (ie. 1).Step 2Press and hold “Option” and the LED light 2 will light up. If the L
Instruction Manual8Turn ON/OFF the Auto ScanIn the auto scan mode, the Video Matrix Switch automatically swithces between Source 1 and Source 2 sequen
Instruction Manual9Set the Auto Scan Time IntervalStep 1Press 3 and 4 at the same time.Step 2All four LEDs should be blinking. Press one to set the au
Instruction Manual10Unit StackThis function allows the user to use one single remote control to command up to 16 Video Matrix Switch units.Setting the
Instruction Manual115. Press 1 once or twice to adjust the input video strength of the selected port. The colour of the LED will indicate the strengt
Instruction Manual12Specications VS420RDVIANumber of Video Source Ports 2Number of Monitor Ports 4Video Type DVIRemote Control YesRemote Control Exte
Instruction Manual13Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-l
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you
Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital dev
Instruction ManualiTable of ContentsIntroduction ...1Packagin
Instruction Manual1InstallationPackaging Contents• DVI Video and Audio Matrix Switcher• Instruction Manual• IR External Sensor • Power Adapter• R
Instruction Manual2Step 3Repeat Step 1 and 2 on Source 2, as shown.Output ConnectionStep 1Connect your monitor to port 1 of the Video Matrix Switch, a
Instruction Manual3Step 3Repeat Step 1 and 2 on the audio and video output channels for port 2, if necessary.Step 4Apply power to the Video Matrix Swi
Instruction Manual4Basic OperationsFront Panel OperationOnce the unit has been powered on, all 4 red LEDs should be illuminated. Due to the factory de
Instruction Manual5Step 3Press 1 or 2 within 3 seconds to select Source 1 or Source 2. After selecting, LED 4 will become either red or orange.• Red
Instruction Manual6Advanced OperationsFront Panel OperationTurn the Video ON/OFFStep 1Press the desired port (ie. 2).Step 2Press and hold “Option” and
Comments to this Manuals