StarTech.com PEX1S1P952 Instruction Manual download pdf (Page 6)

Instruction Manual

Hardware Installation

1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,

external hard drives, etc). Unplug the power cable from the rear of the power supply

on the back of the computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. See documentation for your computer

system for details.

3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the

computer case (refer to documentation for your computer system for details).

NOTE: This card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).

4. Insert the card into the open PCI Express slot and fasten the bracket to the rear of

the case.

NOTE: If installing the card into a small form factor/low prole system, replacing the

pre-installed full prole bracket with the included low prole installation bracket may

be necessary. The serial port will be relocated to a second bracket, so the card will take

up two expansion card slots.

5. OPTIONAL: If supplying power from the computer system power supply, (see

“Setting Power Mode”) connect the LP4 molex plug into the card.

6. Place the cover back onto the computer case.

7. Insert the power cable into the socket on the power supply and reconnect all other

connectors removed in Step 1.

Driver Installation

Windows 2000/XP/Server 2003

1. When the Found New Hardware wizard appears on the screen, insert the Driver CD

into your CD/DVD drive. If you are prompted to connect to Windows Update, please

select the “No, not this time” option and click Next.

2. Select the option “Install Drivers Automatically (Recommended)” and then click the

Next button.

3. Windows should now start searching for the drivers. Once this has completed, click

the Finish button.

1 2 3 4 5 6 7 8 9 10

No comments

StarTech.com PEX1S1P952 Instruction Manual Page 6