StarTech.com PCI1PM Instruction Manual

PCI Parallel Adapter1-Port Remappable PCI Parallel Adapter CardPCI1PMInstruction ManualManual Revision:01/10/2011For the most up-to-date information,

72. Click on “Action” from the top menu and select the “Add Legacy Hardware” option. This will launch the Add Hardware wizard.3. When prompted, selec

85. From Device Manager, right-click on the newly added port and select “Properties”.6. Select the “Resources” tab from along the top tabs and then cl

98. Select the “Value” that matches the DIP switch settings used for the adapter card and note any conflicts that appear. Accept the settings and rebo

102. When prompted to insert the disc, insert the Driver CD that came with the card, into your CD/DVD drive and Windows will automatically proceed to

11SpecicationsBus InterfacePCI revision 2.3 (33MHz)3.3V/5V compatibleForm FactorFull/Low ProfileChipset IDSunix UL7512EQExternal Connectors1 x DB25 fe

12Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions.

StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans m

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

iTable of ContentsIntroduction ... 1Packaging Contents...

1IntroductionThe PCI1PM Re-mappable 1 Port PCI Parallel Card adds one fully featured I/O mapped IEEE 1284 parallel port to your system using a PCI exp

2InstallationWARNING! PCI cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded be

3Hardware Installation1. Turn your computer off and any peripherals connected to the computer (i.e. Printers, external hard drives, etc.). Unplug the

42. When prompted, select that the hardware is already installed, then choose the “Add a new hardware device” from the list of device types.3. Select

54. From the Standard Port Types, select ECP Printer Port, then proceed to complete the installation.5. Once the hardware wizard has completed, access

68. Select “I/O Range” under the Resource Settings then click the “Change Settings” button.9. Select the “Value” that matches the DIP switch settings