StarTech.com PCI1P Specifications download pdf (Page 7)

Instruction Manual

Conguring the LPT port

1. Be sure your printer or other parallel peripheral is securely connected to the PCI Parallel card.

2. Open the Windows Control Panel, open Printers and click Add Printer. This will launch the Add

Printer Wizard.

3. If you want to connect a printer to your PCI Parallel Card, please select PCI ECP/EPP Port, and

click next. Follow any further installation instructions from within Windows.

Note: If you wish to connect a scanner or zip disk to the

parallel port, you will be required to remap the Parallel

Port I/O address to 0x378 or 0x278 under Windows 95 /

98SE / ME.

Remap the Parallel Port I/O address

1. Double-click Multi IO Controller from within the Windows Device Manager. Right-click on PCI

Multi I/O adapter, and select Properties.

2. Select the Congure tab. If you want to remap the I/O address, select Remap to legacy 0x378

and/or 0x278 I/O ports. Click OK. This setting will take eect following the next system

reboot.

3. Once the computer has rebooted, verify that the changes have taken eect by browsing to

System Properties. Once you have ensured that the changes have been applied, close out

of System Properties. Your card is now congured for use.

1 2 3 4 5 6 7 8 9 10

No comments

StarTech.com PCI1P Specifications Page 7