StarTech.com PCI1P Specifications download pdf (Page 5)

Instruction Manual

Installation

1. Make sure that your system is unplugged and you are grounded.

2. Remove the cover of your system (see your computer's user manual for details, if necessary)

and gently turn your computer onto its side, so that the PCI expansion slot openings on

the motherboard are facing upwards.

3. Locate an empty PCI slot (usually white in color) and remove the metal plate that covers the

corresponding rear bracket. You may need a Phillips screwdriver to perform this step.

Retain the screw! You will need it to secure the card later.

4. Gently insert the card into the empty slot, making sure it is rmly seated.

5. Secure the card in place using the screw you removed in Step 3.

6. Replace and secure the computer cover.

Installing the Drivers

Windows 98SE/ ME

Upon booting up for the rst time following the physical installation of the PCI Parallel card,

Windows will detect that the card is present and prompt for driver installation. Insert the driver

CD in your CD/DVD-ROM drive, and direct Windows to search for the correct driver, located on

the driver disk, in the following path: D:\IO\PCI IP\Win9x

Windows 2000/ XP/ Server 2003

Upon booting up for the rst time following the physical installation of the PCI Parallel card,

Windows will detect that the card is present and prompt for driver installation. Insert the driver

CD in your CD/DVD-ROM drive, and direct Windows to search for the correct driver in the

following path: D:\IO\PCI IP\WHQL Driver for 2K_XP_2003, where D:/ species the CD/DVD-

ROM drive letter designation.

1 2 3 4 5 6 7 8 9 10

No comments

StarTech.com PCI1P Specifications Page 5