StarTech.com SAT3510BUEEU Instruction Manual download pdf (Page 8)

Instruction Manual

Close the door. It is suggested that you lock the key lock. 4.

Recognizing the Hard Drive

Windows XP

USB 2.0

If you are using the USB 2.0 interface to connect the hard drive to your

computer, no setup is required. Simply plug the hard drive into an avail-

able USB port and turn the power on to the SAT3510BU2E.

When you open My Computer the drive should be visible under the

heading Devices with Removable Storage.

eSATA

If you are using the eSATA interface to connect the hard drive to your

computer, there are two setup processes you can follow.

If the hard drive is powered on upon booting up the computer, it will

automatically detect the drive. Otherwise, if you connect and power on the

hard drive once the computer has already been booted up, you will need

to open the Device Manager to scan for it.

The following directions outline the necessary steps to access your hard

drive when the computer has already been booted up:

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

StarTech.com SAT3510BUEEU Instruction Manual Page 8