SAT3510BU2E3.5” eSATA/USB 2.0 Removable SATA Hard Drive Enclosure Instruction Manual
Instruction Manual7Windows Vista™USB 2.0If you are using the USB 2.0 interface to connect the hard drive to your computer, no setup is required. Simpl
Instruction Manual8In the left pane of the Computer Management window, select “Device 2. Manager.”Turn on the SAT3510BU2E. Once the power indicator
Instruction Manual9Specications Specification SAT3510BU2EConnector Types1 x eSATA Plug 1 x USB B FemaleChipsetINIC 1611Data Transfer Rate3Gb/s (eSAT
Instruction Manual10Technical SupportStarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solu
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans m
FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FC
Instruction ManualiInstruction ManualTable of ContentsIntroduction ... 1Package Cont
Instruction Manual1Introduction Thank you for purchasing a StarTech.com InfoSafe 3.5” eSATA/USB 2.0 Removable SATA HD Enclosure. Supporting the lates
Instruction Manual2Hardware GuideRear Panel Hardware InstallationInserting a Hard DriveUnlock the keylock situated on the front of the SAT3510BU2E.1.
Instruction Manual3Lift the handle on the front panel and pull the front panel door out from 2. the body (as shown below).Place the hard drive into
Instruction Manual4Removing a Hard DriveUnlock the key lock. 1. Lift the handle on the front panel and pull the front panel door out from 2. the b
Instruction Manual5Close the door. It is suggested that you lock the key lock. 4. Recognizing the Hard DriveWindows XPUSB 2.0If you are using the USB
Instruction Manual6Right-click 1. My Computer and click Manage.In the left pane, select 2. Device Manager.In the Device Manager window, click the “+
Comments to this Manuals