StarTech.com S2510SM12U33 Instruction Manual

Manual Revision: 01/30/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7LED IndicatorThe hard drive enclosure oers an LED indicator, to enable you to monitor drive activity. When the enclosure is powere

Instruction Manual8Initializing the Hard Drive1. If the SATA Hard Drive is blank it may need to be initialized and formatted before use. From the mai

Instruction Manual9SpecicationsHost Interface USB 3.0External Connectors1 x 15 pin SATA Power female 1 x 7 pin SATA Data male 1 x USB 3.0 Cable Maxim

Instruction Manual10Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsProduct Diagram ...1Introduction

Instruction Manual1Product DiagramUSB 3.0 Type B portPower Jack (Power adapter not included)Power/Activity LED

Instruction Manual2IntroductionPackaging Contents• 1 x USB 3.0 SATA HDD Enclosure• 1 x USB 3.0 Cable• 1 x Screw kit• 1 x foot pad set• 1 x Instru

Instruction Manual32. Remove the HDD tray by sliding it out of the enclosure on either side.InstallationHardware InstallationWARNING! Hard drives and

Instruction Manual43. Connect the the 2.5” SATA Hard Drive to the SATA connector on the HDD tray.4. Insert two of the larger screws from the include

Instruction Manual56. Reassemble the enclosure by slide the HDD tray with connected hard drive back into the enclosure. Note: Ensure the HDD label is

Instruction Manual68. Complete installation by connecting the included USB cable from the USB 3.0 type B port on the enclosure to an available USB po