SATA Hard Drive Enclosure3.5” SuperSpeed USB 3.0 to SATA Hard Drive EnclosureSAT3510U3V SAT3510U3VGBInstruction ManualManual Revision:07/26/2010For th
7Using the EnclosureWindows 2000/XP/Vista/7If you are using a brand new hard drive that does not contain any data, then you will first need to prepare
8The New Partition Wizard will appear. Follow the instructions in the wizard to complete setting up the drive. Once complete, the Disk should show u
9SpecicationsBus InterfaceUSB 3.0Chipset IDJMicron JMS539Connectors1 x USB 3.0 type B female1 x DC PowerLEDs1 x Power/ActivityMaximum Data Transfer R
10Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many
FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FC
iTable of ContentsIntroduction ... 1Packaging Contents...
1IntroductionThe StarTech.com USB 3.0 to SATA external hard drive enclosure allows almost any standard 3.5-inch internal SATA Hard Disk Drive (HDD) to
2InstallationWARNING! Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, lost data m
34. Fasten the front panel (with drive attached) to the body of the Enclosure; be cautious that the drive and front panel are properly aligned with t
46. Fasten the rear panel to the Drive Enclosure on both sides using the screws (2) provided.7. Once the drive has been secured within the Enclosure
5PCIe USB 3.0 Card Installation (SAT3510U3VP/SAT3510U3PGB only)WARNING! PCI Express cards, like all computer equipment, can be severely damaged by sta
6Driver InstallationWindows XP/Server 2003/Vista/71. Upon starting Windows, if the “Found New Hardware” wizard appears on the screen, cancel/close th
Comments to this Manuals