StarTech.com PEXSAT31E1 Specifications download pdf (Page 8)

Instruction Manual

How to Use

RAID Conguration

To setup a RAID array using the drives connected to the SATA controller card, the BIOS level

conguration menu must be accessed. To access the conguration menu, during POST (computer

startup), the status display for the controller card will display. When prompted, pressing [CTRL] +

[m] will enter the conguration menu. From the conguration menu, the detected drives can be

congured into any of the supported RAID modes by following the on screen prompts.

1 2 3 4 5 6 7 8 9 10 11

No comments

StarTech.com PEXSAT31E1 Specifications Page 8