StarTech.com PEX1S952 Specifications download pdf (Page 6)

Instruction Manual

Hardware Installation

1. Turn o the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on

the motherboard. Push the board down rmly.

5. Optional: Connect the LP4 molex power connector from the computer power supply to

the card. Make sure the Jumper settings on the card are congured properly.

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

Driver Installation

Windows 2000/XP Driver Installation

1. At the Add New Hardware Wizard window, click on “Next.”

2. Select the option “Search for the best driver for your devices (Recommended)” and click

on “Next.”

3. Select the option “Specify the location” and type in D:\Uart (where D: is your CD-ROM

drive) then click on “Next.”

4. Click “Next” and then “Finish” respectively.

5. Remove the disc, then select “Yes” to restart the computer for the setup to take eect.

To verify successful installation on Windows 2000/XP:

1. From the main desktop, right-click on “My Computer”, then select Manage. In the new

Computer Management window, select “Device Manager” from the left window panel.

2. Double-click on both “Ports (COM & LPT)” and “Multifunction Adapters”. The Serial

Adapter board and additional serial ports (COM ports)should be displayed when

successfully installed. The port is ready to be connected to new device(s).

1 2 3 4 5 6 7 8 9 10

No comments

StarTech.com PEX1S952 Specifications Page 6