StarTech.com UNIDOCKU33 Instruction Manual download pdf (Page 6)

Instruction Manual

Docking Station Installation

WARNING:

Hard drives and docking stations require careful handling. If you are not careful with

your hard disk, lost data may result. Always handle your hard drive and docking station

with caution. Be sure that you are properly grounded by wearing an anti-static strap

when handling computer components or discharge yourself of any static electricity

build-up by touching a large grounded metal surface (such as the computer case) for

several seconds.

1. Connect the Dock to an available power outlet, using the provided power adapter.

2. Connect the Dock to your computer system, using the provided USB 3.0 cable.

SATA Drive Installation

1. Carefully align and insert your 2.5” or 3.5” SATA drive in the SATA Hard Drive slot (slot

#1) on the docking station, such that the SATA power and data connectors on the

drive are properly aligned with the corresponding connectors inside the hard drive

slot.

2. Press the SATA Hard Drive power button.

3. Your computer Operating System will now automatically recognize the drive and it

will be accessible as though it were installed in the system internally.

Note: If your computer fails to automatically recognize your drive it is likely your drive

has not been initialized or formatted correctly. (See Drive Initialization in Software

operation for further instructions.)

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

StarTech.com UNIDOCKU33 Instruction Manual Page 6