StarTech.com ET91000LCOAM Instruction Manual download pdf (Page 7)

Instruction Manual

Installation into ETCHS2U Chassis

The ETCHS2U chassis supports the full line of StarTech.com ET series 2 media

converters, which can be installed in a mixed fashion to suit your environment. The

cards are designed to be hot-swappable, meaning the chassis need not be powered o

in order to remove or insert a card.

1. If the chassis slot was previously unused, loosen the screw at the top of the slot to

remove the cover plate

2. Align the card with the desired slot of the chassis and gently slide the card into the

groove to seat the power connection

3. Re-tighten the captive screw to hold the card in place

Operation

Web Login Page

The media converter can be congured via a Web Page, accessible through any web

browser by using its IP address (Default IP: 10.1.1.1)

Enter the username and password (default username and password is “admin”) and

click “Login”.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

StarTech.com ET91000LCOAM Instruction Manual Page 7