StarTech.com ET91000LCEU Instruction Manual download pdf (Page 1)

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 02/23/2011

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x Fiber Media Converter

• 1 x Power Adapter

• 1 x Instruction Manual

System Requirements

• Multi Mode ber cable

• Cat5e or better UTP Ethernet cable

• Gigabit network infrastructure

• Available AC electrical outlet

ET91000LC / ET91000LCGB / ET91000LCEU

ET91000SC

Gigabit Multi Mode Fiber/Ethernet Media Converter

Installation

1. Connect the ber network cable to the LC connector on the ber

media converter. Using UTP Ethernet cable, connect the cable to

the RJ45 jack.

2. Set the Auto/Force switch on the media converter, to turn

auto negotiate on or o. If set to Force, set the Duplex

switch (full/half) according to the specications of your

networking equipment.

3. The following example illustrates the connection scheme

when connecting from a 1000Base-T Ethernet port of a hub/

switch to a 1000Base-SX/LX port of another hub/switch,

through the ber media converter:

4. The following example illustrates the connection scheme

when connecting from a 1000Base-T Ethernet port on a hub/

switch to a 1000BASE-T Ethernet Network Interface Card

(NIC) in a computer through the ber media converter:

DIP Switch Conguration

Full/ Half:

The Fiber and UTP Duplex will be congured in Full duplex or Half

duplex.

NOTE: This switch includes an “Auto Reset” function so the power-

reset is not necessary when any modication is made here.

LBT:

Loop-back test and get remote side status:

(OFF = Not Active, ON = Active).

NOTE: If the local side loop-back test is active, then LEDs (except

PWR) will all blink rapidly and refresh to display the remote side

status.

LLF:

Link Loss Forwarding (OFF = Not active, On = Active)

Auto/Force:

Auto negotiate duplex mode, or force Full/Half via DIP switches.

LED Conguration

LED Name Status Description

PWR Power

ON Unit is powered

OFF Unit is not powered

Blink LBT mode enabled

Full Duplex Mode

ON Fiber side Full Duplex Mode

OFF Half Duplex Mode

FX Fiber Link

ON Fiber link is detected

OFF Fiber link is not detected

Blink Fiber activity

LBT

Loop-back

Test/Get CPE

status

Blink Mode enabled

OFF Mode disabled

LLF

Link Loss

Forwarding

ON Mode enabled

OFF Mode disabled

TX Ethernet Link

ON UTP link is detected

OFF UTP link is not detected

Blink UTP activity

*ET91000LC shown

1 2

Instruction Manual 1
Specications 2

Summary of Contents

Page 1 - Instruction Manual

Instruction ManualDE: Bedienungsanleitung - de.startech.comFR: Guide de l'utilisateur - fr.startech.comES: Guía del usuario - es.startech.comIT:

Page 2 - Specications

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FC

Comments to this Manuals

No comments

StarTech.com ET91000LCEU Instruction Manual Page 1

Browse online or download Instruction Manual for Network media converters StarTech.com ET91000LCEU. StarTech.com Gigabit RJ45 to Mmode LC Fiber Media Converter - Media converter - 1000Base-SX, 1000Base-T - RJ-45 - LC multi-mode - external - up to 550 m - 850 nm User Manual

Summary of Contents

Comments to this Manuals

StarTech.com ET91000LCEU Instruction Manual Page 1

Browse online or download Instruction Manual for Network media converters StarTech.com ET91000LCEU. StarTech.com Gigabit RJ45 to Mmode LC Fiber Media Converter - Media converter - 1000Base-SX, 1000Base-T - RJ-45 - LC multi-mode - external - up to 550 m - 850 nm User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Network media converters StarTech.com ET91000LCEU