StarTech.com 10/100 Mbps Fiber Ethernet Converter Instruction Manual download pdf (Page 5)

Instruction Manual

Installation

For optimal performance and safety, ensure that the MMC110MMS is

installed in an area that meets the following speciﬁcations:

A temperature between 0 to 45° Celsius (32° and 113° Fahrenheit)•

Relative Humidity (RH) less than 95% (non condensing)•

Surrounding electrical devices that do not exceed the electromagnetic •

ﬁeld (RFC) standards for IEC 801 3, Level 2 (3V/M) ﬁeld strength

Adequate ventilation, with the ventilation holes on each side of the •

equipment being clear of obstruction

Power outlet within 1.8 meters (5.9’) of the product•

Connecting to Power

Connect the AC to DC power adapter to the receptacle on the rear panel

of the MMC110MMS, then insert the corresponding plug into a standard

AC outlet with a voltage range from 100 to 240VAC.

PLEASE NOTE: A grounding strap should be worn while handling the

Media Converter as well as when plugging and unplugging the TX port

connector.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

StarTech.com 10/100 Mbps Fiber Ethernet Converter Instruction Manual Page 5