StarTech.com SATDUP11IMG Instruction Manual download pdf (Page 5)

Instruction Manual

Introduction

Packaging Contents

• 1 x HDD Duplicator/Eraser

• 2 x 10cm SATA Cables

• 2 x 50cm SATA Cables

• 1 x eSATA + 5V DC Type F Power Cable

• 1 x eSATA + 12V DC Type M Power Cable

• 1 x Power Adapter

• 3 x Power Cords (NA, UK, EU)

• 2 x HDD Pads

• 1 x Instruction Manual

WARNING! Hard drives and storage enclosures require careful handling, especially

when being transported. If you are not careful with your hard disk, lost data may

result. Always handle your hard drive and storage device with caution. Be sure that

you are properly grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up by touching a large

grounded metal surface (such as the computer case) for several seconds.

Hardware Installation

WARNING! Hard drives and drive duplicators require careful handling, especially

when being transported. If you are not careful with your hard disk, lost data may

result. Always handle your hard drive and duplicator device with caution. Be sure that

you are properly grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up by touching a large

grounded metal surface (such as the computer case) for several seconds.

1. Ensure the power switch is set in the o position. Using the included Universal

Power Adapter, connect the Power Adapter Port on the back of the

SATDUP11IMG to an available power outlet.

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

StarTech.com SATDUP11IMG Instruction Manual Page 5