StarTech.com SATADOCK22UE Instruction Manual download pdf (Page 6)

Instruction Manual

Disk Installation

1. Connect the Dock to an available power outlet, using the provided power adapter.

2. Connect the Dock to the (powered) Host Computer, using the provided USB/eSATA

cables.

3. Insert the 2.5” or 3.5” SATA/SATA II drive(s) you wish to install, such that the SATA

power and data connectors at the back of the drive are properly aligned with the

corresponding connectors inside the Dock.

4. Press the Power Button on the rear panel of the Dock

Once the drive has been inserted, the operating system will detect that it has been

connected and automatically update the drivers for proper operation.

SATA Drive Removal

If you are using the SATADOCK22UE, the drives can be removed using the eject button

that corresponds with the drive you wish to remove.

When removing the installed drive from the Dock, please ensure that you have

followed the appropriate steps (dependant on the operating system) to disconnect

removable storage. In Windows for example, click on the Safe Remove icon located in

the taskbar. Select the drive from the menu provided, then click Stop. Select the device

to disconnect, and click OK.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

StarTech.com SATADOCK22UE Instruction Manual Page 6