StarTech.com SV231USB Specifications download pdf (Page 8)

Instruction Manual

Operation

Front Panel

1. On-line LED and Selected LED:

When the LED turns green, the connected computer is powered-on When a computer is

selected its corresponding red LED illuminates.

2. Push buttons:

Each computer has a button associated with it on the front panel

for selection.

Auto Scan

Auto Scan automically scans through computers one by one in a xed interval (see Scan Time

below). Note: Keyboard or mouse is not operable during Auto Scan.

• For SV231USB

It sets the scan interval for Auto Scan. The Scan Time options are 3, 8, 15 and 30 seconds.

Note: Scan Time is automically set to the default of 3 seconds when the KAG switch

loses power.

• For SV431USB

To activate Auto Scan, press down front panel push buttons “3” and “4” simultaneously.

The port LED ashes during Auto Scan. Auto Scan is eective for powered-on computers

only. To exit the Auto Scan mode, just tap any one of the push buttons.

To change the Scan Time interval, press both fron panel buttons “1” and “2”

simultaneously. The SV431USB beeps 1, 2, 3, or 4 times for Scan Time of 3, 8, 15, or 30

seconds respectively.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

StarTech.com SV231USB Specifications Page 8