StarTech.com CAB831HDU Instruction Manual download pdf (Page 13)

Instruction Manual

Left <CTRL> + left <CTRL> + <6> + <C>

Selects a computer connected to port C of a Slave connected to port 6 of the Master.

Auto Scan, automatically scans power-on computers one by one at a xed interval:

Left <CTRL> + left <CTRL> + <F1>

When Auto Scan detects any keyboard or mouse activity, it suspends the scanning

till activity stops; it then resumes with the next computer in sequence. The length of

the Auto Scan interval (Scan Rate) is adjustable, see below. To abort the Auto Scan

mode, press the left <CTRL> key twice.

NOTE: Scan Type determines whether an eye-marked computer is to be displayed

during Auto Scan.

Manual Scan enables you to manually switch back and forth between power-on computers.

Left <CTRL> + left <CTRL> + <F2>

Press < > or < > to select the previous or the next computer in sequence. Press

any other key to abort the Manual Scan.

NOTE: Scan Type determines whether an eye-marked computer is to be displayed

during Auto Scan.

To adjust Scan Rate which sets the duration before switching to the next computer in

Auto Scan:

Left <CTRL> + left <CTRL> + <F3>

The Rack Console sends one to four beeps indicating scan interval of 3, 8, 15 and 30

seconds respectively.

To adjust keyboard Typematic Rate (characters/sec), this setting over-rides that of

BIOS and any operating system:

Left <CTRL> + left <CTRL> + <F4>

The Rack Console will generate 1 to 4 beeps corresponding to 10, 15, 20 and 30

characters/sec respectively.

Change Leading Hotkey

The default leading hotkey sequence involves pressing the left <CTRL> twice in

succession (e.g. left <CTRL>, left <CTRL>). This can be changed to the right <CTRL>

key instead, to avoid accidental activation due to using the left <CTRL> key for

functions such as Copy/Paste.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

StarTech.com CAB831HDU Instruction Manual Page 13