StarTech.com 4 Port PCI Express SATA III (6Gbps) Controller Card w/ eSATA - PCIe x4 Instruction Manual download pdf (Page 5)

Instruction Manual

Installation

WARNING! PCI Express cards, like all computer equipment, can be severely

damaged by static electricity. Be sure that you are properly grounded before

opening your computer case or touching your PCI Express card. StarTech.com

recommends that you wear an anti-static strap when installing any computer

component. If an anti-static strap is unavailable, discharge yourself of any

static electricity build-up by touching a large grounded metal surface (such

as the computer case) for several seconds. Also be careful to handle the PCI

Express card by its edges and not the gold connectors.

Shared eSATA Port

The eSATA port on this card is shared with internal SATA port 1 (SATA1). Only one will

function at a time and must be selected using the DIP switch on the card. Do not

change the DIP switch on the card while the computer is running.

SATA2

SATA1

SATA4

SATA3

DIP Switch

Hardware Installation

1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,

external hard drives, etc.). Unplug the power cable from the rear of the power

supply on the back of the computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. See documentation for your computer

system for details.

1 2 3 4 5 6 7 8 9 10

No comments

StarTech.com 4 Port PCI Express SATA III (6Gbps) Controller Card w/ eSATA - PCIe x4 Instruction Manual Page 5